Beyond Power Headless POC

Help Collection： Product & Compatibility

In-depth guides, manuals, and more.

  • Carabiner Dimension

  • How to Properly Wear the Squat Harness

    Please refer to the video below for step-by-step instructions on how to properly wear the Squat Harness:

    Attachment icon
    squat harness.mp4
    Related Articles

  • Anything About Darth SaBar (Limited Edition)

    The Darth SaBar is a modular carbon fiber training bar designed for those who seek versatility and convenience. Customize your experience with adjustable sections—short, long, or triple-section setups.
    ​

    Product Highlights:

    • Contents: Two SaBars

      SaBar with Center Hook x 1:

      Overall Length: 973mm (38.3 inches)

      Segment Lengths: 324mm (12.8 inches), 385mm (15.2 inches), 365mm(14.4)

      inches)

      SaBar with Dual Hooks x 1:

      Overall Length: 1041mm (41 inches)

      Segment Lengths: 358mm (14.1 inches), 385mm (15.2 inches)399mm(15.7)

      inches)

    • Durability: Up to 882 lbs (400 kg).

    • Shipping: End of May (first come, first served)

    For more information about Darth SaBar, you can contact Beyond Power at [email protected], and we will reach out to assist you in resolving your issue.
    ​
    ​

  • Recommended Minimal Distance between the Rack and the Wall

    What’s the recommended minimal distance between the rack and the wall?

    For Sliding Rack Mount’s optimal experience, a minimum distance of 15 cm (around 6 inches) is required between the rack and a flat wall. However, for best results, we suggest keeping an 18 cm (7″) gap between the rack and a flat wall.

    Related Articles

  • Do I need to bolt down my power rack for stability?

    For safety during heavy lifting, we recommend adding weight plates to your rack if it isn’t bolted down.

    Related Articles

  • Spacer compatibility of the Sliding Rack Mount

    The Sliding Rack Mount have different spacers, including the following:

    1. Sliding Rack Mount with 2 x 2” spacer is suitable for rack between 46 x 46 mm – 66 x 66 mm ( 1.81 x 1.81 inch – 2.59 x 2.59 inch)

    2. New Version Sliding Rack Mount 3 x 3” is suitable for rack between 73 x 73 mm – 79 x 79 mm ( 2.87 x 2.87 inch – 3.11 x 3.11 inch)
    Original Version Sliding Rack Mount with 3 x 3” spacer is suitable for rack between 60 x 60 mm – 80 x 80 mm ( 2.36 x 2.36 inch – 3.18 x 3.18 inch)

    3. Sliding Rack Mount with 4 x 4” spacer is suitable for rack between 81 x 81 mm – 103 x 103 mm ( 3.18 x 3.18 inch – 4.05 x 4.05 inch)

    4. Sliding Rack Mount with 2 x 3” spacer is suitable for rack between 50.8 mm x 76.2 mm ( 2 x 3 inch）

    5. Sliding Rack Mount with 3 x 4” spacer is suitable for rack between 76.2 mm x 101.6 mm ( 3 x 4 inch）

    They are all compatible with racks that have side holes ranging from 5/8″ to 1″.

    Related Articles

  • How to Use the Fixed Bar Mount

    The Fixed Bar Mount is the set-and-forget option for mounting VOLTRA I to a round bar. Once it’s installed, you’ve got a stable anchor point for consistent training.

    Best for

    • Home gyms with a dedicated pull-up bar, crossmember, or fixed round tube

    • Anyone who wants a permanent overhead or crossbar anchor point

    • Setups where stability matters more than quick repositioning

    Before you start

    Check these two things first:

    • Your bar is solid and securely fixed. If it can rotate, flex, or shift, don’t mount to it.

    • Your bar diameter is within the supported range (1–2 in).

    Setup

    1) Choose the right spacers

    The Fixed Bar Mount comes with two sets of spacers (1–1.5 in and 1.5–2 in) to fit different bar diameters. Use the spacer set that matches your bar so the mount clamps evenly and sits flush.

    2) Position the mount

    Place the mount on the bar where you want your anchor point. Make sure it’s square and not sitting at an angle.

    3) Install and tighten the screws (two-round method)

    Insert the screws, then tighten in two separate rounds to keep pressure even.

    Round 1: pre-tighten

    Tighten in this order: 1 → 2 → 3 → 4 to about one-third of the final tightness.

    Round 2: final tighten

    Tighten in this order: 4 → 3 → 2 → 1 to full tightness.

    This matters. If you fully tighten one screw first, you’re more likely to end up with uneven clamping.

    4) Mount VOLTRA I and do a quick test pull

    Attach VOLTRA I to the dock and make sure it’s properly locked. Start light and pull smoothly to confirm nothing rotates or shifts. If anything moves, stop and re-tighten before you go heavier.

    Removing or repositioning the mount

    1. Unload the cable and remove VOLTRA I.

    2. Loosen the screws gradually in a cross-pattern until the mount releases.

    3. Remove the mount from the bar.

    4. If you’re repositioning, place it at the new spot and re-tighten using the two-round method.

    5. Remount VOLTRA I and do a light test pull before going heavier.

    Safety checks

    Before you go heavy:

    • Screws are fully tightened and the mount doesn’t rotate or slide

    • The mount sits flush on the bar with even clamping pressure

    • The bar is stable and can’t shift under load

    • Your line of pull is clear and the cable isn’t rubbing on sharp edges

    • You’re not adjusting the mount while the cable is loaded

    Safety zone guideline:

    • Keep at least 2.1 m clear on both sides of the mount.

    • In front of the mount, allow the length of VOLTRA’s cable plus the space you need to exercise, then add 0.5 m as a buffer.

    • Make sure no one and nothing is inside that zone before you start.

    Maintenance

    Wipe down with a damp cloth and mild detergent.

    Periodically check screw tightness and inspect the mount for wear or damage.

    This mount is for indoor use. Don’t leave it outdoors or expose it to heavy moisture, high humidity, or water jets.

    Related Articles

  • How do I know which sliding rack mount size to get?

    You can refer to the detailed specifications page for the sliding rack mount. Alternatively, contact us at [email protected] with the dimensions of your rack’s uprights and hole size. Including pictures or a product link will help us assist you more efficiently.

    Related Articles

  • How to Use the Fixed Rack Mount

    The Fixed Rack Mount gives you a stable, set-and-forget mounting point for VOLTRA I on a rack upright. Once it’s installed, you’ve got a fixed station you can rely on every session.

    Note: The Fixed Rack Mount is sold as a pair, so you’ll receive two mounts when you buy it.

    Best for

    • Home gyms and facilities that want a permanent station

    • Coaches and clinicians who want repeatable positioning

    • Anyone who prefers maximum stability over quick height changes

    Before you start

    • Make sure you’ve got the correct bolt type for your rack hole size (the kit supports common rack standards).

    • Clear a safety zone before installing and training:

      • At least 83 in (2.1 m) clear on both sides of the mount

      • In front: VOLTRA I cable length + your movement space + 20 in (0.5 m) buffer

    Setup

    1. Assemble the mount
      Use the included screwdriver to attach the Mount Base to the Fixed Mount Platform using the bolts.

    2. Choose your mounting height
      ​      Pick the rack holes that match the anchor height you want most often. If you’re installing both mounts as a pair, choose a matching height on both sides.

    1. Bolt the mount to the rack

    • Hold the mount flush against the rack upright and line up the rack installation holes.

    • Insert all bolts with the relevant washers in the correct order and position, before fully tightening any single bolt.

    • Tighten the bolts using the included wrench until the mount is fully secure and doesn’t rock.

    1. Mount VOLTRA I and do a quick test pull

    • Attach VOLTRA I to the mount and make sure it’s properly locked before pulling.

    • Start light and do a smooth test pull. If anything shifts, stop and re-tighten before you go heavier.

    Removing the mount

    • Unload first. Bring resistance down and return the cable to the start.

    • Unload and remove VOLTRA I first.

    • Use the wrench to remove the bolts, then take the mount off the rack.

    Safety checks

    Before you go heavy:

    • Bolts are fully tightened and the mount doesn’t rock.

    • The mount is sitting flush on the upright (no angle or gap).

    • Your rack upright is solid and won’t shift under load.

    • No one and nothing is inside the safety zone.

    • Do a light test pull first.

    • Keep your line of pull clear and the cable path clean.

    Safety notes

    • Indoor use only. Don’t leave the mount outdoors or expose it to rain, sun, water jets, or high humidity.

    • Keep children away from VOLTRA I and the mount.

    • Maintain control of the handle or accessory. Sudden release can cause snap-back. Return the cable to the start position before letting go.

    • Don’t adjust VOLTRA I during a rep. Return the cable to the start position before making any changes.

    • Don’t train under the influence of alcohol, drugs, medication, or sedatives.

    Maintenance

    • Wipe down with a damp cloth and mild detergent.

    • Check bolts and hardware periodically. If anything loosens, stop and re-tighten before training.

    Related Articles

  • How to Use the Adaptive Bar Mount

    The Adaptive Bar Mount lets you mount VOLTRA I to a round bar or tube with a quick, tool-free clamp setup. It’s designed for flexible positioning when you want overhead angles, crossbar mounting, or an anchor point that isn’t tied to a rack upright.

    Best for

    • Home gyms that want overhead or crossbar angles

    • Setups using pull-up bars, crossmembers, weight plate pegs, or round tubing

    • Anyone who wants fast repositioning without tools

    Compatibility

    Fits bars from 0.6 to 2 in (16 to 51 mm) in diameter. Only mount to a bar that’s solid and securely fixed. If the bar can rotate, flex, or shift under load, don’t use it.

    Setup

    1) Open the mount

    1. Locate the unlock knob and turn it counterclockwise.

    2. Once turned, the buckle will pop up.

    3. Open the mount along the buckle.

    2) Mount it to the bar

    1. Place the mount onto the bar.

    2. Close the mount.

    3. Make sure the buckle’s pivot is fully seated into the groove, then press the buckle down to lock.

    3) Tighten it

    1. Open the handle on the mount.

    2. Turn it clockwise to tighten until the mount sits flush and doesn’t move.

    4) Mount VOLTRA I and do a quick test pull

    Attach VOLTRA I to the dock and make sure it’s properly locked before pulling. Start light and pull smoothly to confirm the mount doesn’t rotate or slide. If anything moves, stop and tighten again before you go heavier.

    Adjusting position between exercises

    Unload first. Bring the resistance down and return the cable to start.

    1. Rotate the top handle counterclockwise to loosen the mount.

    2. Adjust the mount to the new position.

    3. Turn the top handle clockwise to tighten again.

    4. Do a light test pull before going heavier.

    Removing the mount

    Unload and remove VOLTRA I first, then:

    1. Open the handle on the black knob and turn it counterclockwise to loosen the mount.

    2. Turn the unlock knob to release the buckle (the buckle will pop up).

    3. Open the mount from the bar and take it off.

    Safety checks

    • Before you go heavy:

    • The mount is fully tightened and locked, and it doesn’t rotate or slide

    • The buckle is locked and the pivot is seated correctly in the groove

    • The bar is stable and can’t shift under load

    • Your line of pull is clear and the cable isn’t rubbing on sharp edges

    • You’re not adjusting or removing the mount while the cable is loaded

    Maintenance

    • Wipe down with a damp cloth and mild detergent.

    • Check the buckle, groove, knobs, and clamp surfaces for dirt, wear, or damage. If tightening starts to feel gritty or inconsistent, clean it before your next session.

    Related Articles