Beyond Power Headless POC

Help Collection： Using VOLTRA I

A functional reference for VOLTRA I — covering its onboard operating modes, app-connected features, and device controls. Use this section to understand how each function works and how to configure it for your training.

  • Weight Training Mode

    Weight Training Mode

    Weight Training Mode is the default way to train with VOLTRA I. It’s designed to feel like a traditional weight stack. You set a load, then you get steady, constant resistance through the range of motion.

    A big part of what makes it feel different from a normal cable machine is the low inertia feel. Resistance starts immediately, without the lag or momentum you get from physical plates. That’s why it can feel smooth and controlled whether you’re lifting light or heavy.

    Before you start, update VOLTRA I to the latest firmware so the menus and options match what’s described here.

    What it’s best for

    Straightforward strength and hypertrophy work (your normal sets and reps)

    Learning new movements on VOLTRA I, because the resistance is predictable

    Any exercise where you want a consistent load from start to finish

    Where to find things on-screen

    Weight Training Mode uses a simple main screen, plus a few menus for settings and metrics.

    Main screen:

    Target weight (displayed at the top)

    Fine-tune slider (-5 to +5)

    Keypad (bottom-left icon for direct weight input)

    Auto Load (long press on weight number)

    Menus:

    Settings (four dots icon): rest timer, Auto Unload, Assist Mode, Resistance Experience

    Metrics (line graph icon): live performance data (peak power, velocity, etc.)

    Modifiers (vertical lines icon): Eccentric, Chains, Inverse Chains

    Cable length (cable icon): adjust start position

    How to use Weight Training Mode

    Select Weight Training mode on the touchscreen.

    Set your resistance (use the main number, the keypad, or the slider).

    Start with a light warm-up set, then build up gradually.

    Weight Training Mode supports fine adjustments. You can use the slider for quick tweaks, or set step increments (for example, 1 lb, 5 lb, or 10 lb) if you prefer to adjust in fixed jumps.

    Beginner tips

    Get comfortable with standard Weight Training reps before you add eccentric overload or chains.

    Use a mirror (or any feedback you rely on) to monitor form. The consistency of Weight Training Mode can make weak points obvious, which is useful if you don’t ignore it.

    If something feels off, reduce the load, clean up the movement, then build again.

    Safety basics

    No matter what settings you’re using:

    Don’t change mode or settings under load. Bring the resistance down and return the cable to the start position first.

    Start lighter than you think when trying a new feature, especially eccentrics or the intense resistance setting.

    Stay in control of the handle. Don’t let the cable snap back.

    Keep your setup solid and your line of pull clean.

    Related Articles

  • What is VOLTRA I?

    How VOLTRA I Works (vs.a traditional cable machine)?

    VOLTRA I uses a precision direct-drive motor to generate resistance electronically — no weight stack, no pulleys, no mechanical linkages. Resistance is software-defined, which means it can change the nature of force itself: the same unit can simulate a cable machine, apply eccentric overload, hold a fixed speed, or replicate a resistance band curve — all switchable in seconds from the onboard touchscreen.

    Key specs at a glance

    Weight

    12.78 lbs / 5.8 kg

    Resistance range

    5–200 lbs (2–90 kg), adjustable in 1 lb increments

    Cable length

    8.5 ft / 2.6 m

    Resistance ratio

    True 1:1 — the number on screen is the resistance applied

    Modes

    7 — Weight Training, Resistance Band, Damper, Isokinetic, Isometric, Custom Curves,Rowing

    Connectivity

    Wi-Fi (OTA firmware updates) + Bluetooth (Beyond+ app)

    Power

    Internal rechargeable battery, USB-C

    Compared to traditional cable machines

    Feature

    VOLTRA I

    Traditional Cable Machine

    Initial Setup Time

    Seconds – Unbox, connect, and mount. Switch between modes in seconds

    Minutes – Adjusting cables, pins, attachments

    Training Profiles

    6 Pro training modalities – Eccentric, Isokinetic, Chains, Custom curves, and more

    Basic – Linear resistance only

    Space / Noise

    Minimal footprint, maximum flexibility – zero floor space when not in use, mounts indoors and outdoors, near-silent

    Bulky – Fixed, large floor footprint, weight stack clang

    Data & Feedback

    Comprehensive metrics – Real-time rep-level feedback and progress tracking with training reports via Beyond+

    None – Manual tracking required

    Cost Efficiency

    High ROI – One system replaces multiple equipment pieces

    Moderate – Single-purpose machines

    What you need to use it (rack, mounts, attachments)?

    VOLTRA I requires a mount to operate — one is not included with the unit.

    For users with a power rack or squat stand, VOLTRA I mounts directly to the upright via the Beyond Power rack mount system, compatible with standard 2×2″, 3×3″, and 4×4″ uprights. For setups without a rack, alternative mounts are available for attachment to walls, beams, posts, and other fixed structures.

    Not sure which to choose? Check the mount selector →

    Attachments Any standard cable attachment works via the included carabiner — handles, bars, ropes. Beyond Power also offers native attachments designed to protect the LCD screen from cable snap-back.

    Does VOLTRA I require a subscription?

    No. VOLTRA I is fully functional out of the box — all 7 training modes are accessible on-device with no subscription required.

    VOLTRA I brochure + user manual

    Attachment icon
    VOLTRA_I_Brochure.pdf
    Related Articles