How VOLTRA I Works (vs.a traditional cable machine)?
VOLTRA I uses a precision direct-drive motor to generate resistance electronically — no weight stack, no pulleys, no mechanical linkages. Resistance is software-defined, which means it can change the nature of force itself: the same unit can simulate a cable machine, apply eccentric overload, hold a fixed speed, or replicate a resistance band curve — all switchable in seconds from the onboard touchscreen.
Key specs at a glance
|
Weight |
12.78 lbs / 5.8 kg |
|
Resistance range |
5–200 lbs (2–90 kg), adjustable in 1 lb increments |
|
Cable length |
8.5 ft / 2.6 m |
|
Resistance ratio |
True 1:1 — the number on screen is the resistance applied |
|
Modes |
7 — Weight Training, Resistance Band, Damper, Isokinetic, Isometric, Custom Curves,Rowing |
|
Connectivity |
Wi-Fi (OTA firmware updates) + Bluetooth (Beyond+ app) |
|
Power |
Internal rechargeable battery, USB-C |
Compared to traditional cable machines
|
Feature |
VOLTRA I |
Traditional Cable Machine |
|
Initial Setup Time |
Seconds – Unbox, connect, and mount. Switch between modes in seconds |
Minutes – Adjusting cables, pins, attachments |
|
Training Profiles |
6 Pro training modalities – Eccentric, Isokinetic, Chains, Custom curves, and more |
Basic – Linear resistance only |
|
Space / Noise |
Minimal footprint, maximum flexibility – zero floor space when not in use, mounts indoors and outdoors, near-silent |
Bulky – Fixed, large floor footprint, weight stack clang |
|
Data & Feedback |
Comprehensive metrics – Real-time rep-level feedback and progress tracking with training reports via Beyond+ |
None – Manual tracking required |
|
Cost Efficiency |
High ROI – One system replaces multiple equipment pieces |
Moderate – Single-purpose machines |
What you need to use it (rack, mounts, attachments)?
VOLTRA I requires a mount to operate — one is not included with the unit.
For users with a power rack or squat stand, VOLTRA I mounts directly to the upright via the Beyond Power rack mount system, compatible with standard 2×2″, 3×3″, and 4×4″ uprights. For setups without a rack, alternative mounts are available for attachment to walls, beams, posts, and other fixed structures.
Not sure which to choose? Check the mount selector →
Attachments Any standard cable attachment works via the included carabiner — handles, bars, ropes. Beyond Power also offers native attachments designed to protect the LCD screen from cable snap-back.
Does VOLTRA I require a subscription?
No. VOLTRA I is fully functional out of the box — all 7 training modes are accessible on-device with no subscription required.